Noova Stack by Noova

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 89% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.

LFO 1 direct modulation amount for pulse width of square oscillator is 201.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 166.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Noise timbre

Noise level is manually set to 3.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 50.24Hz (51).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 173.7Hz (53) and is modulated by Mod Wheel, Note Vel, LFO 2, VCF Env.

Mod Wheel mod-matrix 1 modulation amount for low-pass filter cut-off frequency is 40.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 67.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 169.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 57.

Note Num direct modulation amount for low-pass filter envelope amount is 161.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±21 cents (109).

Oscillators drift level is off.

FX routing & levels fx

FX mode is set to Insert, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is off.

Multi-Band Distortion fx

not yet complete

Delay & Reverb fx

not yet complete

Rack Amplifier fx

not yet complete


Mod Wheel modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 40

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 161

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 169
menu VCF Envelope Velocity Sensitivity 57
menu VCA Envelope Velocity Sensitivity 66

LFO 1 modulator

Controls OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 201
namevalue
LFO 1 Rate 1.17Hz (116)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync on
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 67
namevalue
LFO 2 Rate 0.57Hz (91)
LFO 2 Delay / Fade 0.49s (19)
LFO 2 Shape Triangle
LFO 2 Key Sync on
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0.34s (58)
VCA Envelope Sustain Level 57% (147)
VCA Envelope Release Time 0s (0)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 169
namevalue
VCF Envelope Attack Time 0.02s (3)
VCF Envelope Decay Time 0.53s (87)
VCF Envelope Sustain Level 54% (138)
VCF Envelope Release Time 0s (0)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0